K-CARE - [ KA410NAS ] Numo Arms

• NUMO Toilet Arms are secured to the pan with Nylon or metal fixing bolts normally supplied with the toilet seat.

• NUMO Base Plates feature two slotted holes to the rear based on the Australian Standard of 155mm for toilet seat fixings. There is some room for adjustment. Please check measurement before ordering as some US pans differ from this dimension.

COMPLIANCE

• NUMO Toilet Arm systems have been structurally tested by a certified testing authority for static durability loadings to a maximum of 150 KG [standard and Extra Wide models] and comply with Type A Domestic and Institutional use AS 3973: 2005 – AS 4688.2 and [ISO 7173].

• NUMO Toilet Arm base plates were subjected to a 1000 hour salt spray test by a Certified Testing Authority and comply with Type A AS 2331.3.1 for application in bathrooms, showers and toilets.

• NUMO Toilet Arms are registered with TGA as a Class 1 Medical Device – ARTG# 204027

BASE PLATE
NUMO Toilet Seat Arms base plate is manufactured from high tensile 8 mm thick steel which is zinc etched and plastic coated in appliance white. ARMS
NUMO Arms are manufactured from high impact Nylon reinforced polymer in white to match most toilet accessories.

FIXINGS
Two stainless steel bolts secure the Arms into position. The Arms have three height positions, the maximum being 265mm from the base plate Available as:
Standard – Base plate 530 mm between arms*
Extra Wide – Base Plate 560 mm between arms*

Width Measurements

Standard NUMO

• 530mm at base without arms
• 505mm at base with arms at lowest point
• 485mm at top between arm rests

• 560mm at base without arms
• 535mm at base with arms at lowest point
• 515mm at top between arm rests